2.0 8V SDI Steel Full Camshaft Kit

Steel SDI Camshaft Kit

Drop in SDI steel camshaft replacement, ready to get your car back on the road after a failed camshaft.

These camshafts offer mild gains over a stock 1.9 TDI 8V Camshaft, and are good for 200-250hp power range.

What the kit includes –

• Glyco bearings
• Camshaft seal
• INA black top lifters
• Rocker bolts x 8
• Camshaft bolts x 10

Remember when fitting these camshafts to ensure all 4 pistons are set into centre. easy way of doing this is by removing the crankshaft locking tool and turning the pulley 90 degree anticlockwise. After this has been completed you can fit the camshaft as normal 8nm + 90 degree on the cam bolts. After torquing the cam caps down do a few rotations of the cam to ensure its rotating easily. After this is completed time the camshaft (pin it) and turn the crankshaft back to TDC and proceed with cambelt procedures.